Pipe Hydro Tester Equipment for Different Size Steel Pipe ERW Pipe

• Customization: Available
• After-sales Service: Install Machine , Training Worker , Maintenance
• Warranty: 1year
• Model NO.: HJ-HDT10
• Max Diameter of Workpiece: 1600mm
• Mass Scope of Workpiece: 10000kg
• Type: Pressure Testing
• Maxcapacity: 21MPa
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Computer Control
• Weight: 10-90t
• Power Source: AC380V
• Oil Cylinder Position: Middle
• Advantage: Long Service Life
• Working Mode: Automatic
• Transport Package: Nude
• Specification: max size 1260mm
• Trademark: huajing
• Origin: Hebei
• HS Code: 9024109000
• Production Capacity: 5-10set /Year

Product Description

                                       

                                               Hydraulic testing machine



1. Uses and Features:

1)The equipment is used for kinds of steel pipe pressure-bearing and testing non-standard equipment.
It adopts two lifted rollers to hold the tested steel pipe, using the thrust of master cylinder to press the pipe
between the thrust plate and the pressure plate, so that the pipe two ends can be sealed(end face seal or
radial seal). Based on high-volume low-pressure pump to complete the water injection, and then use
high-pressure pump to complete high pressure test.

2) The equipment uses master oil cylinder thrust and smart balance control system(oil-water balance) to
do hydrostatic testing. It adopts PLC programming smart control touch screen operating system, displaying
the test pressure at real-time. The testing pressure curve can be automatically printed and also can be
stored in computer hard disk.

3) The equipment is with simple structure, high production efficiency, wide range of product specifications,
movable and lockable  steel pipe pressure head push plate which can test various lengths steel pipes.
The equipment applies to hydrostatic testing for seamless steel pipe, welded steel pipe and spiral welded
pipe.

2. Equipment Technical Parameters:

1) Maximum test pressure:5~70MPa(the equipment is designed and manufactured according to user's
    requirement on steel pipe OD and testing pressure);
2) Master cylinder(according to the requirements of the pressure,use 1~6pcs),intelligently control thrust of
    hydraulic master cylinder to be balanced with steel pipe testing pressure.(oil-water balance),total thrust:
    50~3000ton.
3) The pipe ends sealing form : end face seal, radial seal ( according to user's requirement ). Advantages
    and disadvantages:For radial seal, there is 20-30mm testing blind area at ends of pipe, the equipment
    cost of end face seal is much higher

Model	Size (mm)	Pipe length (M)	Pressure (Mpa)
HJ-HDT 114	114	4-13	<=21
HJ-HDT 168	168	4-13	<=21
HJ-HDT 219	219	4-13	<=21
HJ-HDT 325	325	4-13	<=21
HJ-HDT 426	426	4-13	<=21
HJ-HDT 610	610	4-13	<=21
HJ-HDT 720	720	4-13	<=21
HJ-HDT 920	920	4-13	<=21
HJ-HDT 1020	1020	4-13	<=21
HJ-HDT 1620	1620	4-13	<=21

3. Testing Pipe Parameters:

1)Diameter:φ21~φ1620mm;(sectional design and manufacturing the equipment)

2)Length:4~13m;

FAQ
1. Are you able to make the machine as our requirement?
     Yes, we accept customized. 
2. Is it possible for customer to inspect machine before shipment ?
     Yes,of course ,we welcome customer to our factory inspect machine before shipment .
3. Can the clients visit your factory?
     Of course yes, welcome to visit our factory any time.
4. How to ensure the quality of the machine ?
    Before shipment ,we will running the machine in our factory ,also the customer can come to our factory
    inspect machine ,Our machine guarantee period is 1 year ,within one year any part broken (expect human
    factor ) we will offer the parts for free , whole life service offer .